How to choose a sink for the kitchen? Types and types of sinks.

Choosing a sink for the kitchen starts with determining the size that fits perfectly into your kitchen set. It takes into account not only the length and width of the upper part, located above the tabletop, but also the depth of the dishwasher niche.

Various types of sinks for the kitchen differ in a variety of these sizes, so you can go to the store only after you have made all measurements of furniture intended for the installation of the sink.

To choose the right sink for the kitchen, you must consider several parameters:

Rigidity

This parameter is different for different types of sinks for the kitchen. Metal - softer, made of artificial stone - tough. The harder the sink, the more heavy and high-quality mixer you can install on it.

If your choice of sink for the kitchen stopped at a model of low rigidity, and you picked up a heavy mixer - it can be installed in the countertop near the sink or mounted on the wall.

The size

The main thing you need to pay attention to correctly choose a sink for the kitchen - The size of the bowl corresponds to the volume of the cabinet in which it will be placed. The larger the cabinet - the larger the bowl may be, or there may be several.

The form

It all depends on your preferences and kitchen style. Sink can have a round, square, rectangular, oval, angular form, and also their combinations. The most spacious for work - round.

Bowls

With choosing a sink for the kitchen you need to decide how many bowls you need. The standard option is one bowl, and the washing and rinsing of dishes occurs in the same volume.

Two bowls will allow to separate these processes and save water: in one dish it is treated with a washing solution, in the other - rinsed. The second hour may be smaller or the same.

There are models with three bowls.

Wings

Sinks equipped with a “wing” - a special grooved surface over which water flows into the sink through a special drain system are very convenient. If a choose a sink for the kitchen with a “wing”, it will be convenient to lay clean dishes on it, so that the remaining water is drained before putting it to the dryer.

By installing the sinks are divided into three types:

  • Consignment note. It is put on top of the cabinet, there is no tabletop. This is the cheapest of all. types of sinks for the kitchen. Suitable for small spaces, have standard sizes. Disadvantages: water enters the gap between the sink and adjacent pedestals.

  • Mortise invoice. In the tabletop a hole is cut, the edges of which go under the edges of the sink. Sealing joints is required. Performs above the table top.

  • Mortise. Installing such a sink is the most difficult of all. types of sinks for the kitchen. It does not protrude above the table top, or even recessed into it. Such sinks are usually installed on countertops made of artificial stone, and are quite expensive.

Watch the video: The Pros and Cons of Different Sinks (March 2024).

Leave Your Comment