Clothes hanger with your own hands

Hanger is an important attribute in every home. It is a product intended for the temporary placement of clothes, hats. Some models contain a cabinet for shoes. They can have a different design - from the usual nail hammered into the wall, to the whole decorative composition that decorates the interior of the room. There are floor, wall, portable options.

The first prototypes were bulky, appeared in France from the middle of the 16th century. Habitual in everyday life thing came into use only in the 18th century in the form of wardrobes. The prototype of coat hangers was invented much later, patented in 1869 by O.A. Norton from Connecticut, called the "coat hook".

Types and destinations of hangers

All models of hangers can be divided into two main groups - open and closed. Items are used for storing clothes, thanks to them it remains in immaculate condition. When selecting products, it is necessary to determine their functional load, which depends on the specific type:

  1. Wall mounted. They have horizontal and vertical positioning, there are corner and frontal models, they can be additionally equipped with a mirror, a shelf, a crossbar (barbell) for the shoulders. The design is suitable for rooms of small cubic capacity, ideal for hallways, small in size, public cloakrooms, small organizations. The number of hooks is selected as needed.
  2. Outdoor. Conveniently located in the hallway, bedroom, office, private clinic. There are several types of products - stationary and mobile on wheels, open or closed, transforming. The main selection criterion is sustainability.
  3. Suspended. Non-standard option. It is a round horizontal crossbar fixed to the ceiling with suspensions. The number of hangers placed on it depends on its length. There are vertical specimens consisting of one or more hooks.


What materials can make a hanger

Different materials, both artificial and natural, are used for independent construction of the structure. But the product made of wood looks the most organic. It is environmentally friendly, has a natural pattern. Differs in durability, at the correct processing and continuous leaving - durability. Due to the presence of a variety of dyes, wood is painted in any color.

For the production of used not only natural ingredients, metal and plastic are also popular. The first are characterized by increased strength and rigor, the second have low weight and the lowest cost. The original look of forged products, which can be called a work of art.

To make a hanger for clothes with your own hands under the power of each. To do this, you can use any available materials, from leather belts, fittings, to the tusks of elephants, deer horns. It is also possible to combine various raw materials, for example, wood with artistic forging, rope with a fluoroplastic rod.

Making wooden hangers with your own hands

Having made the decision to make a product with one's own hands, it is necessary to draw up its project, which takes into account such parameters as:

  • Durability. Wood treatment with special varnishes and stains that will protect it from moisture, insects, and other effects;
  • Durability, reliability. From these indicators will depend on the maximum load, for example, the ability of a structure to withstand winter clothing, wet clothes, other objects;
  • Dimensions. Take into account the length, width, height. They affect the number of hooks and shoulders, the presence of additional components in the form of shelves for shoes, hats;
  • Aesthetic properties. Fasteners must be masked. The caps of the screws are embedded in the board and painted over. Hooks are located on the same straight line, the shelves are smooth, without distortions;
  • The choice of location. Use the coat rack should be comfortable for all family members;
  • Stylistic design. The subject matter must be combined with the general interior of the room in which it is located.


What tree is best to make

Wooden structures can be constructed from any materials. It will look great product from the boards. The usual snag with knots will give the interior an original look. In order for the construction to last for a long time, it is necessary to use quality components, therefore, when choosing raw materials, special attention is paid to the following characteristics:

  • The color of wood should be uniform, this characteristic characterizes its strength;
  • It is necessary to choose boards without knots, in the presence of it the durability of the material decreases, its processing becomes much more complicated;
  • Preference is better to give deciduous species. Conifers eventually lose their plasticity;
  • Edge should not be rounded, without remnants of the bark. Many manufacturers, in pursuit of profit, are trying to save money, to get as much finished product from raw wood as possible;
  • The presence of cracks in the bar indicates its low quality.

Purchase of sawn timber of natural moisture will lead further to the troubles associated with shrinkage, change in shape, decrease in volume, and the appearance of cracks. To avoid such consequences, it is necessary to choose raw materials, dried in accordance with GOST on specialized equipment.

Required tools

Before you start creating a hanger, you should prepare the tools for work. If this is not done, then you will have to be distracted by the search for the missing parts. The following components will be required to carry out the activity:

  • Screws or dowels for wall constructions;
  • Jigsaw, screwdriver, drill;
  • Screwdriver, hammer;
  • Level, tape measure, pencil or marker;
  • Sandpaper to smooth out the surface.


Outdoor wooden coat rack

The things created from a tree very high-quality and durable. The clothes hanger is functional, it is used not only for the temporary placement of outerwear, but also hats, umbrellas, backpacks, shopping bags, bags, children's toys find their place on it. Often, such storage systems are placed in the corner, at the same distance from both walls, while they are the dominant mobile element of the decor, focusing on themselves. Build a product with your own hands is easy, for clarity, we consider a few basic examples:

  1. As a base, you can take a finished wooden crosspiece for a New Year tree, vertically attach it in the center of the cutting from garden tools (shovels, rakes). Nail the hooks to the rack.
  2. At the base to establish a dried tree trunk or branch, having a good strong branching, able to withstand the load.

In addition to primitive options, you can make high-quality products in the form of floor lamps, frames, panels. To do this, we analyze the master class for the construction of a simple frame structure:

  • Preparing materials. For the work we need a round wooden stick, its length will depend on the dimensions of the hanger. Also copper elements, namely: 6 bells (knees), 4 tees, the same caps, the inner diameter of which must correspond to the outer round timber.
  • With a fretsaw we cut wood into 14 fragments, namely we make segments of the following length: 2 by 150 cm, 2 - 100 cm, 4 - 20 cm, 6 - 15 cm.
  • Putting elements into a single structure. We start from one side of the base. To do this, take three segments of 15 cm and connect them with a copper tee. To the two ends of the round timber, located on one straight line, with the help of the knee fasten perpendicular to the "legs", covering them with copper plugs. They must be in the same plane with the third segment, which is located in the tee. In the same way we construct the second rack.
  • We attach a tee to the protrusions from the obtained sides of the base, into which we insert one meter round timber connecting the structure horizontally, and two segments of one and a half meters stretching upwards.
  • At the final stage, using the remaining sockets, install the crossbar.

Wall Wooden Hanger

The best solution for small areas. It is a structure in the form of a horizontal crossbar on which hooks are placed. It may have additional components in the form of shelves, mirrors. Using the example of step-by-step instructions, let's get acquainted with the example of hand-made production:

  1. We create a drawing of a future design, for this we draw an elementary sketch on paper, download the template from the network.
  2. Having applied the stencil, we transfer the drawing to the raw materials used in the work, for example, board, sheet of chipboard, laminated chipboard, laminate.
  3. Using an electric jigsaw, cut out a workpiece that will serve as the base of the product, fasten directly to the wall.
  4. For rigid mounting of the upper shelf, you can use a metal corner, rail.
  5. We process the blanks with antiseptics, waterproof lacquers and stains.
  6. We attach hooks to the prepared base. They can also be made independently using available materials, for example, wire, nails, tablespoons.
  7. We install the finished product to the place chosen in advance.


Tree hanger

For the manufacture of the structure, you can use not only wood material in the form of boards, chipboard panels, real natural wood with knots that will play the role of hooks will also work. Creating such a composition is easy. To do this, you need to find a snag that meets the requirements, clear it from the bark, remove excess branches, and shorten them if necessary. Varnish the item, paint it. After that, fix it on the wall, hang it on the ceiling, install it on the base.

Original products can be made from chocks. It is advisable to choose oak. The first step is to find a deck with the required number of branches (diameter up to 4 cm). Next, the log is cut in half. Chip is treated with a plane. The surface is cleaned of bark, treated with stain. At the final stage it remains only to fix the structure.

If there are difficulties in finding suitable decks or trees, you can use ordinary branches as raw materials, which can easily be found in the planting, park. The cut can be attached to the treated board instead of hooks, set in a rectangular frame. Install directly on the wall.

Master class: pipe hangers (metal; PVC)

The original accessory can be made of simple metal or plastic pipes. Plumbing products are sold in a huge range, of any diameter and at affordable prices. To create a unique thing you need a simple set of tools, patience and interesting ideas.

Required materials and tools

Remaining after repair, carrying out communications pipes can be used to create a useful hanger. Their footage, the number of plugs and adapters will depend on the design of the structure, the type of material. To make a metal horizontal hanger, you will need the following materials and tools:

  • Pipe length 150 cm - 2 pieces;
  • Pipe length 60 cm - 4 pieces;
  • Pipe length 90 cm - 1 piece;
  • Tee - 2 pieces;
  • Corner - 2 pieces;
  • Cap - 4 pieces;
  • Epoxy adhesive.

PVC pipes are more preferable for creating the first hanger with your own hands. Lightweight material is easy to cut and process. You can assemble the vertical structure from the following parts:

  • Pipe length 80 cm - 1 piece;
  • Pipe length 10 cm - 1 piece;
  • Pipe length 20 cm - 2 pieces;
  • Pipe length 15 cm - 3 pieces;
  • Pipe length 12 cm - 6 pieces;
  • Corner - 7 pieces;
  • Tee - 6 pieces;
  • Caps and caps;
  • Epoxy adhesive.


Step by step assembly instructions

An ordinary piece of furniture, such as a coat hanger, can be turned into a functional piece of art. It can be a vertical or horizontal construction of pipes of any type. The assembly of structures from different materials has its own characteristics.

Metal pipe hanger:

  1. Creating a framework. We connect horizontally through a tee 2 pipes of 60 cm. We also act with the remaining pair of pipes of such length;
  2. Top bar. Glue the two corners to the ends of the pipe 90 cm;
  3. We place one end of each tube 150 cm into the base tee, the second one is covered with a corner of the upper bar;
  4. The ends of the base pipes are closed with plugs.


PVC pipe hanger:

  1. Making a stand. We connect 6 pipes of 12 cm with tees horizontally. It turned out three separate elements. We sell one of the blanks in the tees remaining. Form the legs of the corners;
  2. Hangers hands. We collect parts - tee, pipe 15 cm, corner;
  3. Rack. In the central tee stand stand insert the pipe 80 cm, then hand, pipe 20 cm, another hand and again the pipe. The top is covered with a cap. The hands of the hanger should be directed in different directions, and the corners raised up.

Original ideas and solutions hangers in the interior

The product is easy to manufacture. Materials can be any items, just look around. Consider several interesting options made from improvised means:

  • As a base you can use old skis, sled runners. It is enough to paint them, attach hooks to them, hang on the wall.
  • The original replacement for the usual hooks will serve as hammers, chess pieces, wooden hangers, cut in half, unused dining items. The principle of creation is identical to the hinged shelves. The only difference is that old hammers will be used as hooks, with most of the handle cut off, the other items listed.
  • An alternative option is to use bicycle handlebars fixed on round wooden bases or plywood. They can be randomly hung on the wall.
  • You can use old doors as a floor structure, adding shelves for shoes.
  • Attach cut-off knobs, deer horns, paint brushes to the wall surface, hang hooks from sling to the ceiling.


Conclusion

Choosing between buying or making clothes hangers with your own hands, it is better to give preference to the second option. To do the work personally under the force of each. At the same time, the result of labor will look elegant, original. Thanks to the huge choice of materials, you can create a design in different styles that will fit into any interior.

Watch the video: Making an A-Framed Clothing Rack that flat packs. (March 2024).

Leave Your Comment