Bright interior doors in the interior +75 photos

White doors in the interior is the simplest design decision. Light colors bring lightness and cleanliness to the room without the need for careful selection of the color of the decor. Universal white shades fit into any interior and do not visually conflict with other colors. Light traditional colors include doors in pure, milky white, pastel, light yellow and beige colors. All solutions have a simple, uncomplicated look that, if desired, can be corrected by making decorative and constructive additions to the design.

Exterior doors are often installed in a private house building on the sunny side, due to the reflection of heat and the prevention of excessive heat. Bright interior doors allow you to realize a different interior in each room. In this case, the tone of the door does not necessarily combine with furniture and flooring. It is possible to select a shade for the walls or framing them with baseboards and trims to create the desired contrast.

The advantages and disadvantages of bright doors in the interior of the house

The main advantages of the light door when decorating the premises are such qualities:

• Versatility. Neutral shade allows you to install such doors in any premises, from residential to office and public.
• Ease. The unobtrusive shade creates a perception of the general atmosphere, relaxed and airy, expanding the room and not pressing emotionally on the people in the room.
• Cost Often, decorating fabrics in bright colors is technologically cheaper and incurs less cost for the buyer, except when using natural wood.
• Visual expansion of space. White doors optimally fit into the design of small rooms, visually expanding the space, especially in combination with mirrors.
• Room for decoration. On a regular canvas, you can implement any design ideas for decoration, including independent and industrial application of the image.
• Hiding dust. On a light surface, dust and fingerprints are always less noticeable, although this does not apply to other contaminants.

The main disadvantage of the bright doors in the interior is the problem of care. Any splashes and traces of dirt immediately catch your eye, so the surface requires regular washing, especially in the area of ​​the handle and in the lower half of the door.

What is the combination of bright doors

For the bright doors in the apartment interior are suitable for a variety of color combinations in the design of space. The pale color of the door leaf looks great in a pastel setting, and surrounded by rich colors. Choosing an auxiliary palette you can consider several main directions for orientation when creating a style:

• Walls. The passage can be visually hidden, diverting attention from it by harmoniously fitting into the surrounding palette with the same texture and shade. Bright panels on the walls, on the contrary, you can select a bright door.
• Floor. Usually light doors contrast with flooring. Dark floors of bright carpet, laminate or wood flooring at the same time harmoniously emphasize the entrance, especially if it is an entrance hall, and practical in care.
• Furniture. Using wood or its imitation in setting it is desirable to select the doors of the same texture. This rule is especially important when using white plumbing, plastic furnishings or bleached oak.
• Windows and textiles. You can combine the door with a window, bedding and sofa upholstery. This will smooth out the excessive contrast of the door with the basic design.
• Contrast elements. Plinths and baseboards allow you to give the doors expressiveness, creating a visual border between the opening, the floor and the walls.

Each interior solution has its own nuances, so it is important to choose a combination taking into account the specifics of the room's purpose, style traditions and psychological perception of the design.

Combination with color of platband and plinth

The harmonious perception of the door as an element of the interior is most affected by the color of the baseboards and trim. The best option is to use the same gamut of colors for doors, baseboards, door liners and window frames when finishing. A single line will combine the elements of decor, revive the situation and create harmony even with the contrast between the floor, walls and ceiling. This option in combination with bright walls and dark flooring is suitable for most design styles and is most practical when cleaning. At the same time, it is not recommended to choose a pure snow white color due to the need for frequent cleaning. Therefore, the color combination is recommended to choose from shades of tones such as beige, light wood, ivory and cream. There is also a dark-light version, that is, with the color of the walls in a similar but excellent color scheme - this will visually fix the problem with a low ceiling.

The combination with the color of the walls

When a dark flooring is used in the interior, for example, dark oak or wenge, and the doors are white, the contrast of the planes should be diluted with the color of the walls. The real solution is shades of smoky, beige, gray, gray and blue tones. Simply put, for the walls should be used shades of cold colors. But it should also adhere to the style of the interior. For example, in a high-tech design style, a rich black glossy floor and shiny or glass doors should be diluted with red walls, and in the bedroom with red trims and light pink wallpapers. The important point in the combination of the door scale with the main wall color is restraint. It is unacceptable that the light door and light walls have the same color, unless you want to create the effect of a hidden passage. Even if the walls around the opening contain a drawing, the doors can be painted in the blurry colors of the main elements, but not the elements of the painting itself should not be applied to them.

Combination with flooring

Light doors fit into any situation, but there are different, depending on the shape and finish. According to the general style, smooth or woody textures are selected. The canvas is carved, geometric or simple form. Some classic models are equipped with decorative cutters to be combined with natural wood parquet - this combination has always been relevant and has been used since the 19th century. Perhaps the only bad combination is a bright door and a white floor. The smooth white door on a polished light tile, traditionally associated with a hospital ward, looks especially unattractive. Therefore, it is optimal to combine a bright door with a wooden floor, wooden parquet and laminate, especially since such a combination is the most practical and requires a minimum of maintenance.

The combination with the color of the furniture

The variant with light plinths and dark parquet floor harmonizes perfectly with the free space with a minimum of furniture. For small, crammed with things rooms, it is better to choose a different design option, visually expanding the space. There is also a universal option - a monotonous range of furniture and doors, which looks attractive, regardless of the texture of things. When planning bulk furniture is better to put on the walls, and the decoration of muted tones combined with the door leaf.

For beginners in the design of premises it is recommended to be guided by the following principles:

• apply in the design of up to 3 colors;
• use professional palettes for matching combinations;
• avoid a combination of warm tones with cold (for example, blue with red);
• choose the main uniform color range of the room and operate its shades;
• use special color matching programs when choosing a decor;
• avoid the use of wood of various textures (for example, imitation of oak and spruce).

It is important to remember that the visual perception of furniture depends on the decoration of the walls, and the colors of the door do not have a key role in this matter. However, if it is impossible to distinguish the basic color of the situation indoors, then a bright door of a spotted texture can be used, including shades of primary colors.

Selection of the door to the color of window frames

When the design is already planned out and the light doors do not fit into the overall tone, for example, in cases of colored floor or dark walls, you can harmoniously combine the shade of the door and window openings. This solution is both simple and less expensive - it is enough to link the color of the windows with the doors, and the openings will look harmonious in any room. This option is most convenient, since the window profiles are often produced in white and perfectly harmonize with the light door without texture.

Varieties

The choice of bright interior doors is presented in 5 options, convenient to use and easy to manufacture. Any solution is convenient and involves a lot of decoration options, but the model series have design features that are important to consider. Visual information about each type is given in the table.

In addition to structural differences, the key is the combination of materials - plywood, chipboard, MDF, solid wood and glass.

Panel doors

The door body rests on the board contour and transverse ties. Upholstery is fixed on the reinforcing racks and transverse boards. Inside, the model is filled with panels, which essentially copy the shape of the opening and are a reliable reinforcement. The outer side can be filled with decorative materials. For the manufacture of panels used materials such as MDF and solid wood, providing structural strength. Of course, the finished design is massive and expensive, but provides the ultimate strength of the canvas. The main structural elements are the transverse beam, vertical strapping bar and panels. Strengths include durability, good sound insulation and an attractive look.

Flush doors

Panel board, they are also frame, doors have a solid solid wood frame. Often used cheap conifers or chipboard. On both sides of the frame has a single-layer lining of MDF, and the inner hollow space is filled with a honeycomb structure. External decoration is made of laminate, veneer or PVC film. Partial glazing is possible. The door is further strengthened at the glazing, lock and handle. The main elements are low-cost aggregate, key packings, sheet leaf, pine frame, laminated flooring. The advantages include an affordable price, lightness, a variety of finishes and durability in the inter-room operation.

Knuckle doors

Tsargovye products are mounted on a tree contour by placing in the cavity transversely located boards, called the tsargami. The model has the highest among analogues indicators of weight and resistance to any damage. There is a possibility to supplement the canvas with any materials, for example, glass, without reinforcing this zone. Externally, the design is a typesetting and has a strength index, as well as mass higher than that of the pane-type. The main details are linen, dorsal, stylized upholstery, transparent stripes, rack profile, tie and dowel. Reliability, absence of deformations during operation, long service life and attractive typesetting can be considered as the product's advantages.

Molded doors

In molded products frame extremely simplified. It consists of supporting metal or wooden racks along the contour, filled with a combination of wood, chipboard, glass, opaque panel, etc. the entire height of the opening, with the condition of placing a solid central pillar. It is desirable to use unbreakable glass in the canvas, and it is the weight of the supporting durable elements that determines the final weight of the product. Inside the frame can contain a variety of elements that affect the final strength, weight and appearance. In addition, the products are not limited in size.

Glass doors

The best option in modern design styles are all-glass doors. Triplex has a high strength comparable to metal products, ample decorating capabilities, ensures complete safety and impact resistance, superior to wooden products. It is easy to tint glass in any color scale, to paint, decorate, make a mirror and translucent coating, etc. The only drawback is the lack of sound insulation, so at home it is better to use it as an interior option, and in large public buildings - for the external entrance.

Frequently used styles

Bright doors are used in completely different interiors, regardless of the overall style of the decor and design. This opportunity is opened thanks to a universal neutral appearance. At the same time, for some designs, one can distinguish the advantageous sides of such a decision and its categorical nature.

Scandinavian style

For house interiors of this style it is preferable to use wood. Entrance canvases made of natural wood painted in light, pale blue and turquoise tones with the preservation of texture will best fit. Usually for this purpose, the simplest panels with the dominant white color are chosen.

Minimalism

For a minimalist design, it is better to choose smooth door and floor surfaces without unnecessary design elements. The door frame is traditionally set expressive. Wallpapers can highlight the main fasteners - frames and hinges. Also in minimalism, secret doors are often used for aesthetics - when the canvas merges with the surrounding wall and the jamb.

Classic

In a classical decor natural birch wood is often used, both in the form of a model from a whole cloth, and with volume inserts. Framing is often complemented with pilasters and moldings. For neoclassicism, simpler models can be used without the use of wood.

Conclusion

It is important to understand that the choice of the door should be made at the design stage of design, prior to the procurement of materials and finishing. This value is because you want to choose a similar texture of the fabric and a suitable material. It should also be noted that it is optimal to use products made of MDF or chipboard with natural veneers, or they are economically replaced with eco-veneers or laminate. With limited resources, you can do with the finishing of PVC plywood with a film, which from the design point of view is the most optimal option due to the variety of coatings, but unreliable from the practical side.