Eaves for bay window: types, variants of fastening points, materials, choice depending on the shape

Choosing a cornice for a bay window is not an easy task. What materials, forms of bay fasteners exist and which option is better to prefer: wall or ceiling?

Eaves fixing points

The eaves cornice follows the shape of a window, smoothly curving, may consist of several separate parts. There are two types of mounting: wall and ceiling.

Wall

This type of mounting is suitable for rooms with high ceilings. The construction is attached to the wall with screws and brackets. There is a large selection of shapes and designs.

In the photo is an example of installation on the wall.

Ceiling

Ceiling mounts hold onto the bay window ceiling. With the help of special screws construction can be installed on a concrete and plasterboard ceiling. Such a system visually increases the space. Suitable for small rooms

In the photo on the left stretch ceiling. With this method of installation, the cornice is attached directly to the ceiling surface. The important point in this case is to make a beam in advance and attach it. And only after stretching fabric fabric.

What curtain rods are suitable for bay windows?

The eaves for bay window can withstand both light tulle and heavy curtains. There are the following types of designs:

• Tire. The design is attached to the wall or ceiling. The absence of a gap between the tires and the ceiling visually increases the room. It has hidden fasteners, made of plastic. This material has weight limitations.
• String. It is a two cord, stretched between the brackets. This system is not designed to hold heavy tissue. It takes up little space and is easily transformed.
• Profile. The most sought for bay window. They are made of aluminum or plastic. Happen to one row, two-row and three-row, fastened with a connector. The advantage is low cost.
• Tubular. The basis is a pipe. Its diameter can be any. The design is highly durable.
• Flexible profile. New radius development. It consists of curved aluminum or plastic. Takes any form. Requires special mounting for installation.

What material for bay cornice is better to choose?

Its load capacity depends on the material from which the cornice is made. There are three main types:

• Aluminum. Designs durable and durable. The profile is not made decorative elements. The focus is on curtains. Harmoniously fit into any interior. More often used for semi-power.
• Metal. More durable. They can hang curtains of any weight. Metal profile is distinguished by a variety of shapes, colors, design.
• Plastic. They have low cost and simple construction. Suitable for rooms and projections of any shape.

Bay window forms

There are several forms of bay windows:

• Triangular (2 windows). Usually located in the corner and consists of two windows. Installation of continuous or separate eaves is possible.

  

• Rectangular or trapezoidal (3 windows). One window is located in the center and two on the sides.

  

• Round. Bay window has a soft twist. Characteristic for a classic style.

  

• Polygonal (4 windows and more). It consists of several windows and has more than two corners. Creates extra space in the room. Sometimes it is equipped as a separate part of the house.

  

Ideas in the interior of rooms

The bay curtain rod can be an accent part of the interior of the room, or complement it.

Kitchen

For apartments with a bay window of the П44Т, П44М series, etc., a kitchen with a projection in the facade is typical. This zone is used as a dining, work or recreation area. For the kitchen, you can choose the classic curtains with a tubular eaves or short Roman curtains, repeating the bend of the projection.

Bedroom

For a bedroom with a bay window, choose opaque curtains on a solid ledge. They should be combined with the general interior. If there is furniture nearby, long linens will not fit.

Living room

For the living room fit tulle and thick curtains on the two-row profile mount. Color must be combined with wallpaper and furniture.

On the photo is a bay window in the living room with a profile cornice.

How to hang a cornice?

Before installing the design it is necessary to prepare all the tools, free up space. Installation of the structure on the bay window is as follows:

1. Marking space for the bracket.
2. Drilling holes.
3. Install dowels.
4. Mounting brackets on dowels.
5. Installation

Photo gallery

Bay window is a very beautiful architectural element. Today, you can choose the cornices for the bay window, which fit perfectly in any shape and size of the interior niche.